SUPER EASY ANIMAL PRINT CANE
1 You will need-
CERNIT no1 brown/glamour antique gold/glamour gold/polymer clay blade.
2 First take the antique gold and roll the whole packet into a ball,then form this into a
cylinder shape. With the brown make lots of snake like pieces ( I used most of the packet
but not all)
3 Take the cylinder shape and make a channel using a tool ( you could use a pencil)
4 Arrange the brown snakes around the cylinder ,start by placing one into the channel first.
Make sure you leave a gap.
5 Squeeze together slightly and trim of the end. It should now look like the above photo
( photo 4)
6 Lengthen the whole piece by squeezing and stretching ( slowly) Cut into five equal
equal pieces.
7 Roll out your gold clay using a roller ( or wine bottle) or a pasta machine on the number
4 setting. Wrap each piece in this colour making sure that the joins don’t overlap.
8 Put the pieces together like shown.
9 Lengthen the whole piece and cut into six equal pieces. You can use these canes as they
are for a simple animal print look or arrange them like I have done for a more complex
look.
